Odométrie pour l’entaînement de type « à embardée » (Swerve)

Un utilisateur peut utiliser les classes cinématiques « swerve drive » pour effectuer l”odométrie. WPILib contient une classe SwerveDriveOdometry qui peut être utilisée pour localiser la position d’un robot avec entraînement par embardée sur le terrain.

Note

Étant donné que cette méthode n’utilise que des encodeurs et un gyroscope, l’estimation de la position du robot sur le terrain dérivera avec le temps, d’autant plus que votre robot entre en contact avec d’autres robots pendant le jeu. Cependant, l’odométrie est généralement très précise pendant la période autonome.

Création de l’objet odométrie

The SwerveDriveOdometry<int NumModules> class constructor requires one template argument (only C++), three mandatory arguments, and one optional argument. The template argument (only C++) is an integer representing the number of swerve modules.

The mandatory arguments are:

  • The kinematics object that represents your swerve drive (as a SwerveDriveKinematics instance)

  • The angle reported by your gyroscope (as a Rotation2d)

  • The initial positions of the swerve modules (as an array of SwerveModulePosition). In Java, this must be constructed with each wheel position in meters. In C++, the units library must be used to represent your wheel positions. It is important that the order in which you pass the SwerveModulePosition objects is the same as the order in which you created the kinematics object.

The fourth optional argument is the starting pose of your robot on the field (as a Pose2d). By default, the robot will start at x = 0, y = 0, theta = 0.

Note

0 degrees / radians represents the robot angle when the robot is facing directly toward your opponent’s alliance station. As your robot turns to the left, your gyroscope angle should increase. The Gyro interface supplies getRotation2d/GetRotation2d that you can use for this purpose. See Coordinate System for more information about the coordinate system.

// Locations for the swerve drive modules relative to the robot center.
Translation2d m_frontLeftLocation = new Translation2d(0.381, 0.381);
Translation2d m_frontRightLocation = new Translation2d(0.381, -0.381);
Translation2d m_backLeftLocation = new Translation2d(-0.381, 0.381);
Translation2d m_backRightLocation = new Translation2d(-0.381, -0.381);
// Creating my kinematics object using the module locations
SwerveDriveKinematics m_kinematics = new SwerveDriveKinematics(
  m_frontLeftLocation, m_frontRightLocation, m_backLeftLocation, m_backRightLocation
);
// Creating my odometry object from the kinematics object and the initial wheel positions.
// Here, our starting pose is 5 meters along the long end of the field and in the
// center of the field along the short end, facing the opposing alliance wall.
SwerveDriveOdometry m_odometry = new SwerveDriveOdometry(
  m_kinematics, m_gyro.getRotation2d(),
  new SwerveModulePosition[] {
    m_frontLeftModule.getPosition(),
    m_frontRightModule.getPosition(),
    m_backLeftModule.getPosition(),
    m_backRightModule.getPosition()
  }, new Pose2d(5.0, 13.5, new Rotation2d()));
// Locations for the swerve drive modules relative to the robot center.
frc::Translation2d m_frontLeftLocation{0.381_m, 0.381_m};
frc::Translation2d m_frontRightLocation{0.381_m, -0.381_m};
frc::Translation2d m_backLeftLocation{-0.381_m, 0.381_m};
frc::Translation2d m_backRightLocation{-0.381_m, -0.381_m};
// Creating my kinematics object using the module locations.
frc::SwerveDriveKinematics<4> m_kinematics{
  m_frontLeftLocation, m_frontRightLocation,
  m_backLeftLocation, m_backRightLocation
};
// Creating my odometry object from the kinematics object. Here,
// our starting pose is 5 meters along the long end of the field and in the
// center of the field along the short end, facing forward.
frc::SwerveDriveOdometry<4> m_odometry{m_kinematics, m_gyro.GetRotation2d(),
  {m_frontLeft.GetPosition(), m_frontRight.GetPosition(),
  m_backLeft.GetPosition(), m_backRight.GetPosition()},
  frc::Pose2d{5_m, 13.5_m, 0_rad}};
# Python requires using the right class for the number of modules you have
# For both the Kinematics and Odometry classes
from wpimath.geometry import Translation2d
from wpimath.kinematics import SwerveDrive4Kinematics
from wpimath.kinematics import SwerveDrive4Odometry
from wpimath.geometry import Pose2d
from wpimath.geometry import Rotation2d
class MyRobot:
  def robotInit(self):
    # Locations for the swerve drive modules relative to the robot center.
    frontLeftLocation = Translation2d(0.381, 0.381)
    frontRightLocation = Translation2d(0.381, -0.381)
    backLeftLocation = Translation2d(-0.381, 0.381)
    backRightLocation = Translation2d(-0.381, -0.381)
    # Creating my kinematics object using the module locations
    self.kinematics = SwerveDrive4Kinematics(
      frontLeftLocation, frontRightLocation, backLeftLocation, backRightLocation
    )
    # Creating my odometry object from the kinematics object and the initial wheel positions.
    # Here, our starting pose is 5 meters along the long end of the field and in the
    # center of the field along the short end, facing the opposing alliance wall.
    self.odometry = SwerveDrive4Odometry(
      self.kinematics, self.gyro.getRotation2d(),
      (
        self.frontLeftModule.getPosition(),
        self.frontRightModule.getPosition(),
        self.backLeftModule.getPosition(),
        self.backRightModule.getPosition()
      ),
      Pose2d(5.0, 13.5, Rotation2d()))

Mise à jour de la pose du robot

The update method of the odometry class updates the robot position on the field. The update method takes in the gyro angle of the robot, along with an array of SwerveModulePosition objects. It is important that the order in which you pass the SwerveModulePosition objects is the same as the order in which you created the kinematics object.

Cette méthode Update doit être appelée périodiquement, de préférence dans la méthode periodic() du Sous-Système. La méthode update envoie la nouvelle pose du robot.

@Override
public void periodic() {
  // Get the rotation of the robot from the gyro.
  var gyroAngle = m_gyro.getRotation2d();
  // Update the pose
  m_pose = m_odometry.update(gyroAngle,
    new SwerveModulePosition[] {
      m_frontLeftModule.getPosition(), m_frontRightModule.getPosition(),
      m_backLeftModule.getPosition(), m_backRightModule.getPosition()
    });
}
void Periodic() override {
  // Get the rotation of the robot from the gyro.
  frc::Rotation2d gyroAngle = m_gyro.GetRotation2d();
  // Update the pose
  m_pose = m_odometry.Update(gyroAngle,
    {
      m_frontLeftModule.GetPosition(), m_frontRightModule.GetPosition(),
      m_backLeftModule.GetPosition(), m_backRightModule.GetPosition()
    };
  )
}
def periodic(self):
  # Get the rotation of the robot from the gyro.
  self.gyroAngle = self.gyro.getRotation2d()
  # Update the pose
  self.pose = self.odometry.update(self.gyroAngle,
      self.frontLeftModule.getPosition(), self.frontRightModule.getPosition(),
      self.backLeftModule.getPosition(), self.backRightModule.getPosition()
  )

Réinitialisation de la pose de robot

The robot pose can be reset via the resetPosition method. This method accepts three arguments: the current gyro angle, an array of the current module positions (as in the constructor and update method), and the new field-relative pose.

Important

If at any time, you decide to reset your gyroscope or wheel encoders, the resetPosition method MUST be called with the new gyro angle and wheel encoder positions.

Note

The implementation of getPosition() / GetPosition() above is left to the user. The idea is to get the module position (distance and angle) from each module. For a full example, see here: C++ / Java / Python

In addition, the GetPose (C++) / getPoseMeters (Java / Python) methods can be used to retrieve the current robot pose without an update.