Bant Genişliği Kullanımını Ölçme
On the FRC® Field each team is allocated limited network bandwidth (see R704 in the 2024 manual). The FMS Whitepaper provides more information on determining the bandwidth usage of the Axis camera, but some teams may wish to measure their overall bandwidth consumption. This document details how to make that measurement.
Not
Teams can simulate the bandwidth throttling at home using the FRC Bridge Configuration Utility with the bandwidth checkbox checked.
Measuring Bandwidth Using the Performance Monitor (Win 7/10)
Windows contains a built-in tool called the Performance Monitor that can be used to monitor the bandwidth usage over a network interface.
Performance Monitor’ü Başlatma
Open the Start menu and in the search box, type perfmon.msc
and press Enter.
Real-Time- Gerçek Zamanlı Monitörü Aç
In the left pane, click Performance Monitor to display the real-time monitor.
Network Counter Ekle
Sayaç eklemek için ekranın üst tarafındaki yeşil artı işaretini tıklayın
Sol üst bölmede, seçmek için
Network Interface
nü bulun ve tıklayın.Sol alt bölmede, istenen ağ arayüzünü bulun (veya tüm arayüzleri izlemek için All instances kullanın)
Click Add >> to add the counter to the right pane.
Click OK to add the counters to the graph.
Ekstra Sayaçları Kaldırın
In the bottom pane, select each counter other than Bytes Total/sec
and press the Delete key. The Bytes Total/sec
entry should be the only entry remaining in the pane.
Data Properties-Veri Özelliklerini Yapılandırın
Press Ctrl+Q to bring up the Properties window. Click on the dropdown next to Scale
and select 1.0
. Then click on the Graph tab.
Grafik Özelliklerini Yapılandırın
In the Maximum Box
under Vertical Scale
enter 524288 (this is 4 Megabits converted to Bytes). If desired, turn on the horizontal grid by checking the box. Then click OK to close the dialog.
Bant Genişliği Kullanımını Görüntüleme
You may now connect to your robot as normal over the selected interface (if you haven’t done so already). The graph will show the total bandwidth usage of the connection, with the bandwidth cap at the top of the graph. The Last, Average, Min and Max values are also displayed at the bottom of the graph. Note that these values are in Bytes/Second meaning the cap is 524,288. With just the Driver Station open you should see a flat line at ~100000 Bytes/Second.
Wireshark kullanarak Bant Genişliği Kullanımını Ölçme
If you can not use performance monitor, you will need to install a 3rd party program to monitor bandwidth usage. One program that can be used for this purpose is Wireshark. Download and install the latest version of Wireshark for your version of Windows from this page. After installation is complete, locate and open Wireshark. Connect your computer to your robot, open the Driver Station and any Dashboard or custom programs you may be using.
Arayüzü seçin ve yakalamayı başlatın
In the Wireshark program on the left side, double click the interface you are using to connect to the robot.
Open Capture File Properties
Let the capture run for at least 1 minute, then click Statistics then Capture File Properties.
Bant Genişliği Kullanımını Görüntüleyin
Average bandwidth usage, in bits/second is displayed near the bottom of the window.