Verifying SmartDashboard is working

Connection Indicator

SmartDashboard will automatically include the connection status and IP address of the NetworkTables source in the title of the window.

SmartDashboard disconnected. SmartDashboard connected and showing the IP address.

Connection Indicator Widget

SmartDashboard includes a connection indicator widget which will turn red or green depending on the connection to NetworkTables, usually provided by the roboRIO. For instructions to add this widget, look at Adding a Connection Indicator in the SmartDashboard Intro.

Robot Program Example

public class Robot extends TimedRobot {
   double counter = 0.0;
   public void teleopPeriodic() {
      SmartDashboard.putNumber("Counter", counter++);
   }
}
#include "Robot.h"
float counter = 0.0;
void Robot::TeleopPeriodic() {
   frc::SmartDashboard::PutNumber("Counter", counter++);
}
from wpilib import SmartDashboard
self.counter = 0.0
def teleopPeriodic(self) -> None:
   SmartDashboard.putNumber("Counter", self.counter += 1)

This is a minimal robot program that writes a value to the SmartDashboard. It simply increments a counter 50 times per second to verify that the connection is working. However, to minimize bandwidth usage, NetworkTables by default will throttle the updates to 10 times per second.

SmartDashboard Output for the Sample Program

SmartDashboard showing the output of "counter" set up in the code above.

The SmartDashboard display should look like this after about 6 seconds of the robot being enabled in Teleop mode. If it doesn’t, then you need to check that the connection is correctly set up.

Verifying the IP address in SmartDashboard

Checking the "Team Number" property in the Preferences dialog box.

If the display of the value is not appearing, verify that the team number is correctly set as shown in this picture. The preferences dialog can be viewed by selecting File, then Preferences.

Verifying Program using OutlineViewer

You can verify that the robot program is generating SmartDashboard values by using the OutlineViewer program.

Expand the SmartDashboard row. The value Counter is the variable written to the SmartDashboard via NetworkTables. As the program runs you should see the value increasing (1398.0 in this case). If you don’t see this variable in the OutlineViewer, look for something wrong with the robot program or the network configuration.

Using OutlineViewer to view the NetworkTables data used by the program.